Network engineering

Stage 1 · Lesson 6 of 8

IPv6 addressing

How networks work and subnetting

addresses are 128 bits, written as eight groups of four hex digits, such as 2001:db8:10:20::1. Two shortening rules apply: leading zeros in a group can be dropped, and one run of all-zero groups can be replaced by a double colon. Every IPv6 interface has a link-local address starting fe80, used only on that link, and usually a global unicast address that is routable.

almost always use a /64, and hosts can configure themselves with SLAAC (stateless address autoconfiguration) from advertisements, or through DHCPv6. There is no in IPv6; multicast does that job. Operators, mobile networks and clouds rely on IPv6 now.

Common trapusing the double colon twice in one address, which makes it ambiguous and invalid.

A question to check yourself, an AI practice session and 1 cheat sheet entry come with the full roadmap. Unlock

Resources for this stage

Start with· follow one of these

Practise

  • Build a two-subnet network and use simulation mode to watch ARP, DHCP and pings step by step

Keep handy

  • Capture your own traffic and read real headers; the display filter chapter is the one to bookmark

Also worth your time

Mark this stage as not done?